ELEV8
The big gold dial. One number for ELEV8's measured mastering dynamics, tone and glue: 0 is off, 100 is the full treatment. Most masters live between 30 and 70.
Opens the stereo sides. 0 keeps the image as recorded; turn up for air in the sides without touching the centre.
Three gentle tone moves in dB: low shelf around 178 Hz, mid bell around 636 Hz, high shelf around 10 kHz. Centre is flat, double-click resets.
Peaks of the output signal, flowing in from the left. The fill under the wave grows denser with fine grain as CHARACTER and the tone dials add harmonics: a picture of the density, not a measurement. 1x / 1/2x sets the speed, the snowflake freezes the picture. Here the scale zooms to each example; the plugin draws a fixed -30 to +2 dBFS.
The small dial at the top right: level after ELEV8 in dB. 0 is unity; trim it to match the bypassed level for a fair comparison, or to leave headroom.
IN and OUT show peaks in dBFS for left and right on a 36 dB scale (all values below 0). The number holds the highest peak for 1.5 seconds. On OUT, click the number to switch between TP (true peak after 4x oversampling, held 3 seconds; keep it under 0 for streaming) and PEAK (sample peak). The red lights above the bars latch when a channel reaches 0 dBFS, in TP mode also at 0 dBTP: click the bars to reset them.
The pill at the top right switches the whole plugin, level-matched and click-free, to compare before and after.
The particles around the big dials breathe slowly and flare up briefly on kicks and snares at the input. Pure display, nothing in the sound.
Without a licence the plugin runs in demo mode: a short gap in the sound every 20 seconds. Click the DEMO field and pick the .licence file from your order. One licence works on two computers; LOG OUT frees a slot.
One big knob. Dynamics, tone and glue in one move.
CHARACTER brings dynamics, tone and glue in one move: 0 is off, 100 is the full treatment, most masters sit between 30 and 70. Built from a measured reference, not from a hunch.
CHARACTER
The one big move. With one knob you decide how much of the measured treatment your master gets. The golden corona around the knob lives with the material: it breathes and reacts to kick and snare.
WIDTH for the sides
0 leaves the stereo image as it is. Higher opens the sides without touching the centre. One knob, no mid/side course.
LOW · MID · HIGH
Three gentle tone controls at 178 Hz, 636 Hz and 10 kHz, ±6 dB each. The centre is flat. Enough to colour a master, too little to break it.
Measure, don't guess.
ELEV8, DOMIN8 and the suite share the readouts you actually work with when mastering.

ELEV8 v0.16.0, rendered from the real plugin.
Listen first, then load one file. No account.
You can install the plugin without buying. It runs as a demo until a licence file is loaded.
Demo
Without a licence the plugin runs with every feature, only the sound drops out for 1.5 seconds every 20 seconds. The window reads DEMO · CLICK TO LOAD LICENCE.
One file, done
After the purchase you get a .licence file. A click on the demo field opens the file dialog, pick the file, done. No account, no typing codes.
Two devices
One licence is valid on two devices. LOG OUT in the plugin frees a slot again. The suite licence also unlocks ELEV8 and DOMIN8 on their own. Offline, everything keeps running for three days.
Runs where you master.
In short.
Get ELEV8.
The suite: both in one window, order swappable. Also unlocks ELEV8 and DOMIN8 on their own.
Get the suite